StudioCob PFC2
ORDER CODE: STUDIOCOBPFC2
Share me

IP65

Immagine Principale
  • STUDIOCOBPFC2
  • STUDIOCOBPFC2
  • STUDIOCOBPFC2
  • STUDIOCOBPFC2
  • STUDIOCOBPFC2
  • STUDIOCOBPFC2
  • StudioCob PFC2
    Code Finishing Avail.
    STUDIOCOBPFC2BK Black
    STUDIOCOBPFC2WH
    DISCONTINUED
    White

    StudioCob PFC2 is a powerful, incredibly versatile and IP65 rated LED PAR. Fusing the old and the new, it pairs a COB LED source with a traditional parabolic reflector to deliver a proper PAR replacement with a homogenised output, single shadow and flexible lens options.

    Features:
    IP65 rated connectors for easy use both indoor and outdoor
    150W RGBW COB LED source with HD dimming with an extensive and even colour palette
    Flexible lens options of 18° - 38° - 60°

    LIGHT SOURCE
    • Source:
      150
      W
      COB RGBW / FC LED
    • CCT:
      white LED 5'700
    • Luminous flux:
      (18°) 3'632
    • Lux:
      (18°) 2'958
      lx
      @3 m full
    • Source life expectancy:
      > 50.000 h
    OPTICS
    • Beam angle:
      (on-board) 18° - (inc) 38° - (opt) 60
      °
    • Field angle:
      (on-board) 36° - (inc) 63
      °
    • Lens type:
      parabolic reflector in combination with HD fresnel lens
    • Additional optics:
      38° (inc)
    COLOUR SYSTEM
    • Colour mixing:
      RGBW / FC
    • CCT:
      CCT control through dedicated DMX channel
    • Colour wheel:
      virtual colour wheel with macros
    DYNAMIC EFFECTS
    • Static mode:
      selection of static colour
    • Manual mode:
      manual adjustment of colour
    • Auto mode:
      built-in programs with execution speed adjustment
    BODY
    • Body:
      sturdy die-cast aluminium body
    • Body colour:
      black, white finishing available
    CONTROL
    • Protocols:
      DMX512, RDM
    • DMX channels:
      4 / 6 / 10
      channel
    • RDM:
      RDM for remote monitoring and settings
    • Display:
      black OLED touch display
    • Firmware upgrade:
      yes, via USB - DMX interface (UPBOXPRO/UPBOX1) not included
    • Master/Slave:
      for synchronised operation of more units linked in a chain
    ELECTRONICS
    • Dimmer:
      linear 0 ~ 100% electronic dimmer
    • Dimmer curves:
      4
      selectable dimming modes available
    • Strobe / shutter:
      1 - 28
      Hz, electronic
    • Display battery:
      self-charging battery backup
    • Operating temperature:
      -20° ~ +45°
    • LED Control:
      flicker free operation
    • Selectable PWM:
      600 ~ 25.000 Hz
    ELECTRICAL
    • Mains power supply:
      100-240V - 50/60Hz
    • Max power consumption:
      140
      W
    • Max power consumption (at 120V):
      145
      W
    • Output (at 230V):
      12
      units on a single power line
    • Power factor:
      0,96
    PHYSICAL
    • IP rating:
      65
      for temporary outdoor application, not for fixed installations
    • Cooling:
      active, silent operation
    • Suspension and fixing:
      double hanging bracket suitable for safe hanging and for floor positioning
    • Signal connection:
      Seetronic XLR 5p IN/OUT connectors
    • Power connection:
      Seetronic powerCON waterproof IN/OUT connectors
    • Dimensions (WxHxD):
      259x187x370
      mm
    • Weight:
      5,6
      kg
    CERTIFICATIONS / APPROVALS
    • Certifications / Approvals:
      CE, UKCA, RCM, cTUVus, FCC
    BOX CONTENT
    • 1 x STUDIOCOBPLUSFC
    • 1 x 1,5 meters power cable (BARE END - SEETRONIC IP65 power connector)
    • User Manual
    ITEMS REF.
    Accessory Code
    Description
    optional
    Slim aluminum clamp, 200kg loading, 48-51mm tubes, M10 bolt, Black
    optional
    Steel security cable for hanging bodies, inox steel shackle, L=60 cm, black
    include
    Optics for STUDIOCOBPLUS projectors series, 18°
    include
    Optics for STUDIOCOBLUS projectors series, 38°
    optional
    Filter frame for STUDIOCOB projectors
    optional
    Optics for STUDIOCOBLUS projectors series, 60°
    optional
    Barn door 4 directional flaps to adjust the light beam, f. frame included
    optional
    Flight case for 8 STUDIOCOBPLUS
    optional
    Firmware uploader kit, USB IN, 5pin XLR DMX OUT, USB OUT
    optional
    Firmware uploader kit, USB IN, 5-pin XLR DMX OUT connector

    Data sheet & specs

    User manual

    DMX chart & personalities

    STUDIOCOBPFC2 Firmware rev. 1.2
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link

    Tech docs

    File name File size Download

    Software

    File name File size Download

    Firmware

    Firmware update instructions

    1 Download the firmware (only the latest version is available - contact support@prolights.it for more info)

    2 Download the updater software UpBox_Tool 

    3 Follow the instructions in the following guide
    -------------------------------------------------------------------------------
    Notes: 
    • Firmware updates require the UPBOXPRO compatible with all Prolights products
    • It's possible to use UPBOX1 and UPBOX2 *DISCONTINUED* checking the compatibility in the below tab
    • UpBox_Tool  software is compatible with all UPBOX interfaces
    • To update NET boards with .EHEX files a network cable and Professional Uploader software it's needed. It's possible to follow this guide
    Update Tool: UPBOX1UP5 UPBOX1UP5 UPBOXPRO UPBOXPRO
    Check hardware changelog before downloading firmware
    Revision Release date Firmware changelog HW Compatibility
    1.2 STABLE 31/10/2023 Improvement:
    • Increased to 65535 the maximum working hours of the device.
    Update Tool: UPBOX1UP5 UPBOX1UP5 UPBOXPRO UPBOXPRO
    Check hardware changelog before downloading firmware
    Revision Release date Firmware changelog HW Compatibility
    1.0 STABLE 17/09/2021
    • First stable firmware release.

    Info Request