OMEGAX39C45LT

VIDEO

Driver chip type: MBI 5151
LED source: Nationstar SMD1921 black frame and white face
Pixel pitch: 3.9mm / 0.15''
Panel resolution: 128x128pixels
Module resolution: 64x64pixels
Luminous flux: 5.000nit
Contrast: 3.000:1
Grayscale: 18 bit
Refresh rate ≥: 3.840Hz
Drive Mode: 1/8 scan, constan current
Vertical viewing angle: 120°
Horizontal viewing angle: 120°
LED density: 65.536LED/sqm
Dead Pixel Ratio: <0,002
LED avg life span: 100.000

ELECTRICAL

Power input/output: Seetronic TRUE powerCON
Power supply: AC 110/230 V 50/60 Hz
Max power consumption (panel): 210W
Avg power consumption (panel): 60W
Max power consumption (sqm): 840W
Avg power consumption (sqm): 240W
Standby power consumption (pannello): 16W
Max rated current/panel:: AC 220 V / 0,91 A
Working temperature: -20°C / +50°C
Working humidity: 10~90 RH%

CONTROL

Receiving card type: A8S
Other controllers type: rotation, 18bit+, clearview, mapping, firmware copy, RCFGX restore, calibration restore
Control protocol: Novastar
Signal input: waterproof Seetronic RJ45
Signal output: waterproof Seetronic RJ45

MECHANICS

Magnetic LED modules: not available
Other specifics: curve configurations, climbable, rear panel swapping, corner protection for transport, velcro strips for gapless mounting
Module size (WxH): 250x250mm / 9.84''x9.84''
Panel size(WxHxD): 500×500×90.6mm / 19.69''
Vertical hanging system: built-in aliscaf clamp support
Cooling: natural cooling of the peculiar chassis and to absence of fans
Connection: seamless locking system
Curvability: concave 2°, 5°, 10° - convex 2°, 5°
Body: die-cast aluminium housing
Color: black
IP rating: IP65 (front and rear)
Panel weight: 9kg / 19.84lbs
Weight per square meter: 36kg / 79.37lbs
Hanging Panel Quantity ≤: 20
Compliant Standard: CE, EMC, UL

DMX chart & personalities

	File name	File size	Download

Firmware

Firmware update instructions

1 Download the firmware (only the latest version is available - contact support@prolights.it for more info)

2 Download the updater software UpBox_Tool

3 Follow the instructions in the following guide
-------------------------------------------------------------------------------
Notes:

Firmware updates require the UPBOXPRO compatible with all Prolights products
It's possible to use UPBOX1 and UPBOX2 *DISCONTINUED* checking the compatibility in the below tab
UpBox_Tool software is compatible with all UPBOX interfaces
To update NET boards with .EHEX files a network cable and Professional Uploader software it's needed. It's possible to follow this guide