ECLHD2
PROLIGHTS
discontinued

EclProfile HD2

230W high power LED ellipsoidal profile with white source

EclProfile HDL2 updates EclProfile HDL ranges with extra brightness and higher CRI / R9 / TLCI. The fixture is a proper LED replacement for the traditional 750W Tungsten ellipsoidal luminaire. The optical system harnesses the power of a 230W COB LED to create an even beam with clean shutter cuts and beautiful sharp or soft edge gobo focusing. Featuring HDL dimming and available in a 3.200 K or 5.700 K, the EclProfile HDL2 delivers the performance and quality of output demanded from this level of the luminaire.

Main features:

  • Outstanding brightness over 10K lm for DY and 9K lm for TU versions
  • CRI > 97 (TU) and CRI > 96 (DY), High R9 and TLCI values

PHOTO GALLERY

Technical specifications

LIGHT SOURCE
  • Source: 230W high-power white LED
  • CCT: (TU) 3.200 K - (DY) 5.700
  • Luminous flux: (TU) 5°: TBD - 10°: TBD - 14°: 8'562 lm -19°: 8'345 lm - 26°: 9'261 lm - 36°: 8'964 lm - 50°: 7'683 @full
  • Luminous flux: (DY) 5°: TBD - 10°: TBD - 14°: 9'649 lm -19°: 9'822 lm - 26°: 10'974 lm - 36°: 10'781 lm - 50°: 9'053 lm @full
  • Lux: (TU) 5°: TBD - 10°: TBD - 14°: 11'055 lx - 19°: 6'495 lx - 26°: 4'954 lx - 36°: 2'728 lx - 50°: 1'381lx @5 m full
  • Lux: (DY) 5°: TBD - 10°: TBD - 14°: 12'000 lx - 19°: 7'118 lx - 26°: 5'571 lx - 36°: 3'105 lx - 50°: 1'569lx @5 m full
  • CRI: (TU) >97; (DY) >96
  • R9: (TU) >87; (DY) >96
  • TLCI: (TU) >97; (DY) >96
  • TM30 Rf: (TU) >92; (DY) >89
  • TM30 Rg: (TU) 100; (DY) 100
  • Source life expectancy: > 50.000 h
OPTICS
  • Beam angle: optional 5° / 10° / 14° / 19° / 26° / 36° / 50° / zoom 15°-30° / zoom 25°-50°
  • Lens type: high-quality glass lens optics
  • Focus: manual
COLOUR SYSTEM
  • Colour mixing: static white
DYNAMIC EFFECTS
  • Control Resolution: 16-bit dimmer
  • Gobo size: B, outer: 86 mm - image: 64,5 mm - thickness: 1,1 mm
  • Static mode: selection of static colour
  • Manual mode: manual adjustment of colour
  • Auto mode: built-in programs with execution speed adjustment
BODY
  • Body: sturdy die-cast aluminium body
  • Body colour: black
CONTROL
  • Protocols: DMX512, RDM
  • DMX channels: 1 / 2 / 5channel
  • RDM: RDM for remote monitoring and settings
  • Display: Graphic User Interface
  • Firmware upgrade: yes, via USB - DMX interface (UPBOXPRO/UPBOX1) not included
  • Master/Slave: for synchronised operation of more units linked in a chain
ELECTRONICS
  • Dimmer: linear 0 ~ 100% electronic dimmer
  • Dimmer curves: 4 selectable dimming modes available
  • Strobe / shutter: 1 - 30 Hz, electronic
  • Operating temperature: -10° ~ +45°
  • LED Control: flicker free operation
  • Selectable PWM: 600 ~ 25.000 Hz
ELECTRICAL
  • Mains power supply: 100-240V - 50/60Hz
  • Max power consumption: 210W
  • Output (at 230V): 15 units on a single power line
  • Power factor: TU: >0.90 - DY: >0,94
PHYSICAL
  • IP rating: 20
  • Cooling: combination of heat pipe cooling system and low noise fan
  • Suspension and fixing: bracket for hanging and positioning
  • Signal connection: Amphenol XLR 5p IN/OUT connectors
  • Power connection: Neutrik powerCON IN/OUT connectors
  • Dimensions (WxHxD): 342x506x530mm / 13.46''x19.92''x20.87''
  • Weight: 7,11kg / 15.67lbs
CERTIFICATIONS / APPROVALS
  • Certifications / Approvals: CE, UKCA, RCM
BOX CONTENT

Versions

Code
CCT
CRI
R9
Lumen
ECLHD2TUBK
ECLHD2TUBK (DISCONTINUED)
3.200 K
97
87
9'261 lm
ECLHD2DYBK
ECLHD2DYBK (DISCONTINUED)
5.700 K
96
96
10'974 lm

Accessories & Related Products

FCLECL
FCLECL
(optional)
Flight case for 8 pcs of ECLFC or ECLHDL series
C6040B
C6040B
(optional)
Aluminum clamp for 28mm spigot, 200kg load, 48-51mm tubes, black
C6002B
C6002B
(optional)
Slim aluminum clamp, 200kg loading, 48-51mm tubes, M10 bolt, Black&White& White
RSR0630B
RSR0630B
(optional)
Steel security cable for hanging bodies, inox steel shackle, L=60 cm, black
9533FCAL03
9533FCAL03
(optional)
Ass. 3x2.5mm TH07 cable, SCHUKO plug, MENAC3FCA socket, L.3m
9513FCAL03
9513FCAL03
(optional)
Ass. 3x2.5mm TH07 cable, 16A 3p 230V CEE plug, MENAC3FCA socket, L.3m
958025L03
958025L03
(optional)
3x2.5mm TH07 Cable, 20A 3p PwCon FCA, 20A 3p PwCon FCB, L. 3m
TOUR53415L03
TOUR53415L03
(optional)
Dmx cable HC5340. CANC5MXX XLR 5p->CANC5FXX XLR (f) 5p, L.3m
ECL LZ
ECL LZ
(optional)
Optics for ECLFC/HDL profiler, gel frame holder included, zoom 15°-30°
ECL LZ
ECL LZ
(optional)
Optics for ECLFC/HDL profiler, gel frame holder included, zoom 25°-50°
ECLLB05BK
ECLLB05BK
(optional)
5° lens barrel for Ecl Profile fixtures, filterframe included, black housing
ECLLB14BK
ECLLB14BK
(optional)
14° lens barrel for Ecl Profile fixtures, filterframe included, black housing
ECLLB19WH
ECLLB19WH
(optional)
19° lens barrel for Ecl Profile fixtures, filterframe included, white housing
ECLLB19BK
ECLLB19BK
(optional)
19° lens barrel for Ecl Profile fixtures, filterframe included, black housing
ECLLB26BK
ECLLB26BK
(optional)
26° lens barrel for Ecl Profile fixtures, filterframe included, black housing
ECLLB26WH
ECLLB26WH
(optional)
26° lens barrel for Ecl Profile fixtures, filterframe included, white housing
ECLLB36WH
ECLLB36WH
(optional)
36° lens barrel for Ecl Profile fixtures, filterframe included, white housing
ECLLB36BK
ECLLB36BK
(optional)
36° lens barrel for Ecl Profile fixtures, filterframe included, black housing
ECLLB50WH
ECLLB50WH
(optional)
50° lens barrel for Ecl Profile fixtures, filterframe included, white housing
ECLLB50BK
ECLLB50BK
(optional)
50° lens barrel for Ecl Profile fixtures, filterframe included, black housing
ECLPRGHA
ECLPRGHA
(optional)
Gobo holder for ECL Profile fixtures, A size
ECLGH
ECLGH
(optional)
Gobo holder for ECL/ECLFC/ECLHDL profiler
ECLPRGH
ECLPRGH
(optional)
Gobo holder for ECL Profile fixtures, B size
ECLPRIRIS
ECLPRIRIS
(optional)
Iris accessory for ECL Profile fixtures
ECLIRIS2
ECLIRIS2
(optional)
Steel iris diaphragm for ECLFC/ECLHDL profiler
SPGM10
SPGM10
(optional)
28mm spigot for fixtures, M10 bolt
SPGM12
SPGM12
(optional)
28mm spigot for fixtures, M12 bolt
ECLPROFILESEF1
ECLPROFILESEF1
(optional)
Soft edge filter and holder kit for ECL profile projectors series
<b>Upbox</b> 1
Upbox 1
(optional)
Firmware uploader kit, USB IN, 5pin XLR DMX OUT, USB OUT
UPBOXPRO
UPBOXPRO
(optional)
Firmware uploader kit, USB IN, 5-pin XLR DMX OUT connector

DOWNLOAD

DMX chart & personalities

File name File size Download
DMX chartEclhd2_DMX_CHARTS.pdf51KB
ECLHD2TUBK Firmware rev. 1.1
manufacturer fixture library (Link) Link
prolights_eclipsehd2tu.d4Download
manufacturer fixture library (Link) Link
prolights_eclipsehd2tu_1ch.hedDownload
prolights_eclipsehd2tu_2ch.hedDownload
prolights_eclipsehd2tu_5ch.hedDownload
prolights@eclipsehd2tu@1ch.xmlDownload
prolights@eclipsehd2tu@2ch.xmlDownload
prolights@eclipsehd2tu@5ch.xmlDownload
ECLHD2DYBK Firmware rev. 1.1
manufacturer fixture library (Link) Link
prolights_eclipsehd2dy.d4Download
manufacturer fixture library (Link) Link
prolights@eclipsehd2dy@2ch.xmlDownload
prolights@eclipsehd2dy@5ch.xmlDownload
prolights@eclipsehd2dy@1ch.xmlDownload
manufacturer fixture library (Link) Link

Tech docs

File name File size Download

Software

File name File size Download

Firmware


Firmware update instructions

1 Download the firmware (only the latest version is available - contact support@prolights.it for more info)

2 Download the updater software UpBox_Tool 

3 Follow the instructions in the following guide
-------------------------------------------------------------------------------
Notes: 
  • Firmware updates require the UPBOXPRO compatible with all Prolights products
  • It's possible to use UPBOX1 and UPBOX2 *DISCONTINUED* checking the compatibility in the below tab
  • UpBox_Tool  software is compatible with all UPBOX interfaces
  • To update NET boards with .EHEX files a network cable and Professional Uploader software it's needed. It's possible to follow this guide
Update Tool: UPBOX1UP5 UPBOX1UP5 UPBOXPRO UPBOXPRO
Check hardware changelog before downloading firmware
Revision Release date Firmware changelog HW Compatibility
1.1 STABLE 15/12/2018 10 second default display backlight: perform the Factory Reset after the update. Rev. 1
Update Tool: UPBOX1UP5 UPBOX1UP5 UPBOXPRO UPBOXPRO
Check hardware changelog before downloading firmware
Revision Release date Firmware changelog HW Compatibility
1.1 STABLE 15/12/2018 10 second default display backlight: perform the Factory Reset after the update.

Info Request

News

11 November 2024
PROLIGHTS Illuminates the WWE Experience in Riyadh
PROLIGHTS Illuminates the WWE Experience in Riyadh
04 November 2024
Intense Lighting Expands Inventory with PROLIGHTS EclProfile CT+
Intense Lighting Expands Inventory with PROLIGHTS EclProfile CT+
28 October 2024
PROLIGHTS Illuminates the Karol Szymanowski Academy of Music in Katowice
PROLIGHTS Illuminates the Karol Szymanowski Academy of Music in Katowice
21 October 2024
NRK Chooses PROLIGHTS for the New Lighting Setup in Studio 5 of Dagsrevyen
NRK Chooses PROLIGHTS for the New Lighting Setup in Studio 5 of Dagsrevyen
18 October 2024
Centrestate Sound & lighting choose PROLIGHTS Smart BatWash
Centrestate Sound & lighting choose PROLIGHTS Smart BatWash
15 October 2024
PROLIGHTS lights up season 13th of Masterchef Poland
PROLIGHTS lights up season 13th of Masterchef Poland
11 October 2024
PROLIGHTS lights up the final bouts of No Limit Boxing with EclPanel TWC
PROLIGHTS lights up the final bouts of No Limit Boxing with EclPanel TWC
08 October 2024
Gotcha AV expands catalogue with PROLIGHTS
Gotcha AV expands catalogue with PROLIGHTS
04 October 2024
PROLIGHTS lights up the Great Hall of the Historic Town Hall in Košice
PROLIGHTS lights up the Great Hall of the Historic Town Hall in Košice
02 October 2024
[LITE]COM Group Chooses PROLIGHTS for Its Rental Inventory
[LITE]COM Group Chooses PROLIGHTS for Its Rental Inventory
27 September 2024
PROLIGHTS lights up the show “Alle mot 1” in Norway
PROLIGHTS lights up the show “Alle mot 1” in Norway
20 September 2024
P.A. PEOPLE's Stand Shines with PROLIGHTS
P.A. PEOPLE's Stand Shines with PROLIGHTS

Subscribe to our Newsletter

Loading...