New Products View catalogue
EclCyclorama 100
ORDER CODE: ECLCYC100
Share me

330W

Immagine Principale
  • ECLCYC100
  • ECLCYC100
  • ECLCYC100
  • ECLCYC100
  • ECLCYC100
  • ECLCYC100
  • ECLCYC100
  • ECLCYC100
  • ECLCYC100
  • ECLCYC100
  • ECLCYC100
  • ECLCYC100
  • ECLCYC100
  • ECLCYC100
  • ECLCYC100

    • EclCyclorama 100 is a soft-edge, linear cyclorama and floodlight, designed in a surprisingly low profile form factor to meet applications at both front and end of the stage, offering an unprecedent level of brightness in its category. The fixture is equipped with a custom and calibrated RGB + Warm White LED source, which is capable to deliver a linear and high quality white reproduction of the entire spectrum with high CRI, TLCI and TM30 performances. The optical system has been designed to offer a very wide asymetric beam angle, and capable of a superior lumen efficiency, making the EclCyclorama range a very flexible solution, suitable for both application where fixture are connected each other or separated by a considerable distance, without worrying of dark-edge or uniformity gaps. The fixture is extremely user friendly and offers a multitude of control possibilities being DMX, RDM, Artnet, sACN and Wireless DMX.

    Features:
    RGB + Warm White colour systems allows high quality of whites (CRI 93 @3.200 K) and bright colours.
    Slim design, with only 12 cm height for easy implementation in the front or at the back of the stage.
    Wide Asymmetric beam angle to allow flexible installation at modular distances between fixtures
    Hardware designed with tilt angle adjustment, beam control and flexible hanging and ground stacking applications.

    LIGHT SOURCE
    • Source:
      330
      W
      RGB + Warm White
    • Luminous flux:
      (with 40°x80° filter on board) 22'649
      @full
    • Lux:
      @1 m to wall and 1,5 m height @full (with standard filter 40°x80°) 1'240 lx - (with 40° filter) 2'610 lx - (with 10°x60° filter) 3'110 lx - (with 30°x60° filter) 2'880
      lx
    • CRI:
      93 @3.200 K; 92,6 @5.600 K
    • R9:
      88 @3.200 K; 93,7 @5.600 K
    • TLCI:
      91 @5.600 K
    • TM30 Rf:
      90,9 @5.600 K
    • TM30 Rg:
      106 @5.600 K
    • Source life expectancy:
      > 50.000 h
    OPTICS
    • Beam angle:
      (VxH) 40°x80
      °
    • Additional optics:
      see available accessories
    COLOUR SYSTEM
    • Colour mixing:
      RGB + Warm White
    • CCT:
      CCT control, + / - green correction, tungsten emulation
    • White presets:
      2.800 K - 10.000
      K
    • Colour wheel:
      virtual colour wheel with macros
    DYNAMIC EFFECTS
    • Control Resolution:
      16-bit dimmer, colours
    • Special features:
      linear crossfade channel from any white to any colour; virtual CTO on colours
    BODY
    • Hardware on-board:
      sockets for quick-Lock Omega bracket (clamp not included)
    • Body:
      sturdy die-cast aluminium body
    • Body colour:
      black
    • Other:
      +/- 8° angle adjusting
    CONTROL
    • Protocols:
      DMX512, RDM, Art-Net, sACN, W-DMX
    • Wireless Control:
      included, wireless solution receiver
    • RDM:
      RDM for remote monitoring and settings
    • Display:
      Graphic User Interface
    • Firmware upgrade:
      yes, via USB - DMX interface (UPBOXPRO/UPBOX1) not included
    ELECTRONICS
    • Dimmer curves:
      selectable dimming modes available
    • Strobe / shutter:
      1 - 30
      Hz, electronic
    • Operating temperature:
      -10° ~ +45°
    • LED Control:
      flicker free frequency with adjustable PWM
    • Selectable PWM:
      600 ~ 25.000 Hz
    ELECTRICAL
    • Mains power supply:
      100-240V - 50/60Hz
    • Max power consumption:
      400
      W
    • Standby power:
      38,76 W
    • Power factor:
      >0,94
    PHYSICAL
    • IP rating:
      IP20
    • Cooling:
      heat sink without fan
    • Suspension and fixing:
      any position with quick-lock omega brackets
    • Signal connection:
      Amphenol XLR 5p IN/OUT connectors
    • Data connection:
      RJ45 IN/OUT
    • Power connection:
      Seetronic powerCON waterproof IN/OUT connectors
    • Dimensions (WxHxD):
      1000x119x148
      mm
    • Weight:
      9,6
      kg
    CERTIFICATIONS / APPROVALS
    • Certifications / Approvals:
      CE, UKCA, RCM, cTUVus, FCC
    BOX CONTENT
    • 1 x ECLCYC100
    • 1 x 1,5 meters power cable (BARE END - SEETRONIC IP65 power connector)
    • 2 x OS25
    • User Manual
    ITEMS REF.
    Accessory Code
    Description
    C6002BC6002B
    optional
    Slim aluminum clamp, 200kg loading, 48-51mm tubes, M10 bolt, Black
    TOUR53415L03TOUR53415L03
    optional
    Dmx cable HC5340. CANC5MXX XLR 5p->CANC5FXX XLR (f) 5p, L.3m
    FCLECLCYCFCLECLCYC
    optional
    Flightcase for 4 pcs of ECLCYC100 or 8 pcs ECLCYC050 divided in two layers
    RSR0630BRSR0630B
    optional
    Steel security cable for hanging bodies, inox steel shackle, L=60 cm, black
    LRLUNALRLUNA
    optional
    Single Universe DMX transceiver with Bluetooth
    ECLCYCBD100ECLCYCBD100
    optional
    Upper and lower barndoors for adjust the light beam for ECLCYC100
    ECLCYC100POECLCYC100PO
    optional
    Pole operated aluminium yoke bracket for pan/tilt for ECLCYC100
    ECLCYCF40L100ECLCYCF40L100
    optional
    Light diffusion filter for ECLCYC series projectors, 40°, lenght 100 cm
    ECLCYCF1060L100ECLCYCF1060L100
    optional
    Light diffusion filter for ECLCYC series projectors, 10°x60°, lenght 100 cm
    ECLCYCF3060L100ECLCYCF3060L100
    optional
    Light diffusion filter for ECLCYC series projectors, 30°x60°, lenght 100 cm
    ECLCYCOHBECLCYCOHB
    optional
    Orientable hanging bracket for ECLCYC series projectors
    OS25OS25
    include
    Quick-Lock omega bracket, M10 hole
    OS25D13OS25D13
    include
    Quick-Lock omega bracket, M12 hole
    UPBOX1UP5UPBOX1UP5
    optional
    Firmware uploader kit, USB IN, 5pin XLR DMX OUT, USB OUT
    UPBOXPROUPBOXPRO
    optional
    Firmware uploader kit, USB IN, 5-pin XLR DMX OUT connector

    Data sheet & specs

    File name File size Download
    Letter datasheet Eclcyc100_A4_DATASHEET_(EN).pdf 365KB
    Letter datasheet Eclcyc100_LETTER_DATASHEET_(EN).pdf 397KB
    Tender Specification Eclcyc100_TENDER_SPECIFICATION.pdf 4MB

    User manual

    DMX chart & personalities

    File name File size Download
    DMX chart Eclcyc100_DMX_CHARTS.pdf 61KB
    DMX chart Eclcyc100_DMX_CHARTS.pdf 319KB
    VectorWorks VECTORWORKS_SYMBOLS.vwx 233KB
    VectorWorks PROLIGHTS_VECTORWORKS_v24_LIBRARY.vwx 310MB
    VectorWorks PROLIGHTS_VECTORWORKS_v19_LIBRARY.vwx 478MB
    ECLCYC100 Firmware rev. 1.9
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link
    eclcyc100_theatre_1ch.fdfDownload
    eclcyc100_theatre_2ch.fdfDownload
    eclcyc100_theatre_4ch.fdfDownload
    eclcyc100_theatre_5ch.fdfDownload
    eclcyc100_theatre_6ch.fdfDownload
    eclcyc100_theatre_10ch.fdfDownload
    eclcyc100_theatre_15ch.fdfDownload
    eclcyc100_theatre_17ch.fdfDownload
    eclcyc100_tour_4ch.fdfDownload
    eclcyc100_tour_6ch.fdfDownload
    eclcyc100_tour_10ch.fdfDownload
    eclcyc100_tour_15ch.fdfDownload
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link
    prolights@eclcyclorama100@rev_1.5.gdtfDownload
    manufacturer fixture library (Link) Link
    prolights@eclcyclorama100@10ch_theatre@rev_1.5.xmlDownload
    prolights@eclcyclorama100@10ch_tour@rev_1.5.xmlDownload
    prolights@eclcyclorama100@15ch_theatre@rev_1.5.xmlDownload
    prolights@eclcyclorama100@15ch_tour@rev_1.5.xmlDownload
    prolights@eclcyclorama100@17ch_theatre@rev_1.5.xmlDownload
    prolights@eclcyclorama100@1ch_theatre@rev_1.5.xmlDownload
    prolights@eclcyclorama100@2ch_theatre@rev_1.5.xmlDownload
    prolights@eclcyclorama100@4ch_theatre@rev_1.5.xmlDownload
    prolights@eclcyclorama100@4ch_tour@rev_1.5.xmlDownload
    prolights@eclcyclorama100@5ch_theatre@rev_1.5.xmlDownload
    prolights@eclcyclorama100@6ch_theatre@rev_1.5.xmlDownload
    prolights@eclcyclorama100@6ch_tour@rev_1.5.xmlDownload
    ecl cyc.rarDownload
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link
    ecl cyc 100 6 channel theatre.v3fDownload
    ecl cyc 100 6 channel tour.v3fDownload
    ecl cyc 100 10 channel theatre.v3fDownload
    ecl cyc 100 10 channel tour.v3fDownload
    ecl cyc 100 15 channel theatre.v3fDownload
    ecl cyc 100 15 channel tour.v3fDownload
    ecl cyc 100 17 channel theatre.v3fDownload
    ecl cyc 100 1 channel theatre.v3fDownload
    ecl cyc 100 2 channel theatre.v3fDownload
    ecl cyc 100 4 channel theatre.v3fDownload
    ecl cyc 100 4 channel tour.v3fDownload
    ecl cyc 100 5 channel theatre.v3fDownload
    ECLCYC100 Firmware rev. 1.5
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link
    eclcyc100_theatre_1ch.fdfDownload
    eclcyc100_theatre_2ch.fdfDownload
    eclcyc100_theatre_4ch.fdfDownload
    eclcyc100_theatre_5ch.fdfDownload
    eclcyc100_theatre_6ch.fdfDownload
    eclcyc100_theatre_10ch.fdfDownload
    eclcyc100_theatre_15ch.fdfDownload
    eclcyc100_theatre_17ch.fdfDownload
    eclcyc100_tour_4ch.fdfDownload
    eclcyc100_tour_6ch.fdfDownload
    eclcyc100_tour_10ch.fdfDownload
    eclcyc100_tour_15ch.fdfDownload
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link
    prolights@eclcyclorama100@rev_1.5.gdtfDownload
    manufacturer fixture library (Link) Link
    prolights@eclcyclorama100@10ch_theatre@rev_1.5.xmlDownload
    prolights@eclcyclorama100@10ch_tour@rev_1.5.xmlDownload
    prolights@eclcyclorama100@15ch_theatre@rev_1.5.xmlDownload
    prolights@eclcyclorama100@15ch_tour@rev_1.5.xmlDownload
    prolights@eclcyclorama100@17ch_theatre@rev_1.5.xmlDownload
    prolights@eclcyclorama100@1ch_theatre@rev_1.5.xmlDownload
    prolights@eclcyclorama100@2ch_theatre@rev_1.5.xmlDownload
    prolights@eclcyclorama100@4ch_theatre@rev_1.5.xmlDownload
    prolights@eclcyclorama100@4ch_tour@rev_1.5.xmlDownload
    prolights@eclcyclorama100@5ch_theatre@rev_1.5.xmlDownload
    prolights@eclcyclorama100@6ch_theatre@rev_1.5.xmlDownload
    prolights@eclcyclorama100@6ch_tour@rev_1.5.xmlDownload
    ecl cyc.rarDownload
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link
    ecl cyc 100 6 channel theatre.v3fDownload
    ecl cyc 100 6 channel tour.v3fDownload
    ecl cyc 100 10 channel theatre.v3fDownload
    ecl cyc 100 10 channel tour.v3fDownload
    ecl cyc 100 15 channel theatre.v3fDownload
    ecl cyc 100 15 channel tour.v3fDownload
    ecl cyc 100 17 channel theatre.v3fDownload
    ecl cyc 100 1 channel theatre.v3fDownload
    ecl cyc 100 2 channel theatre.v3fDownload
    ecl cyc 100 4 channel theatre.v3fDownload
    ecl cyc 100 4 channel tour.v3fDownload
    ecl cyc 100 5 channel theatre.v3fDownload

    Photometrics

    CAD symbols & drawings

    File name File size Download
    3D sketchup ECLCYC100_3D_SKETCHUP.zip 2MB
    3D revit ECLCYC100_3D_REVIT.zip 1MB
    2D Eclcyc100_2D.dwg 1MB
    3D ECLCYC100_3D.zip 1MB
    2D cad symbols Eclcyc100_2DSYMBOLS.dwg 59KB
    Technical drawing Eclcyc100_TECHNICAL_DRAWING.pdf 121KB

    Tech docs

    File name File size Download
    Noise Report Eclcyc100_NOISE_REPORT.pdf 561KB

    Software

    File name File size Download
    Software Professional Uploader 0KB

    Firmware

    Firmware update instructions

    1 Download the firmware (only the latest version is available - contact support@prolights.it for more info)

    2 Download the updater software UpBox_Tool 

    3 Follow the instructions in the following guide
    -------------------------------------------------------------------------------
    Notes: 
    • Firmware updates require the UPBOXPRO compatible with all Prolights products
    • It's possible to use UPBOX1 and UPBOX2 *DISCONTINUED* checking the compatibility in the below tab
    • UpBox_Tool  software is compatible with all UPBOX interfaces
    • To update NET boards with .EHEX files a network cable and Professional Uploader software it's needed. It's possible to follow this guide
    Update Tool: UPBOX1UP5 UPBOX1UP5 UPBOXPRO UPBOXPRO
    Check hardware changelog before downloading firmware
    Revision Release date Firmware changelog HW Compatibility
    1.9 STABLE 19/05/2023 New functions:
    • Spektra Calibration: new modes available
      • ON: CCT and colors are fully calibrated, working in the common color space definition set by Spektra. This means that output of multiple fixtures will match with no visible differences. Color Saturation is slightly reduced.
      • PURE COLORS: CCT is calibrated, giving perfect white matching across multiple fixtures, but primary and secondary colors are calibrated to their native color space which allows maximum color saturation. The closer you move towards white, the more closely multiple fixtures will match each other's output. The further you move away from white and the closer you move towards saturated color, the less closely multiple fixtures will match each other's output.
      • OFF: CCT doesn't guarantee High CRI Values and color output of one fixture may or may not closely match that of other fixtures.
    • Added Dimmer Speed Off
    • Added DMX Fault settings
    Improvements:
    • Renamed Dimmer Mode naming to be Dimmer Speed
    • Jump prediction was implemented on all modes if the fixture is connected in ArtNet/sACN.
    • Adjusted RDM parameters to fit new functions and new naming.
    • Adjusted Control Channel to fit new functions as follows.
      • Dimmer Speed Off (Control channel values 62 -63 )
      • DMX Fault Hold (Control channel values 64 -65 )
      • DMX Fault Blackout (Control channel values 66 - 67)
      • DMX Fault Standalone (Control channel values 68 - 69)
      • Spektra Calibration On (Control channel values 70 -71 )
      • Spektra Calibration Pure Colors  (Control channel values 72 - 73)
      • Spektra Calibration Off (Control channel values 74 - 75)
    Fixed bugs:
    • The function "Reset All Channels Controlled" (dmx values 254-255) does not work in any mode.

    Note: Hardware revision > 3.0: NET PCB is updated using ".PRL" file format, ignore ".EHEX" file in this case    		 Rev. 1.0
    Rev. 1.1
    Rev. 2.0
    Rev. 3.0
    1.5 STABLE 31/05/2021 Improvements:
    • Improved display management.
    		 Rev. 1.0
    Rev. 1.1
    Rev. 2.0
    Update Tool: UPBOX1UP5 UPBOX1UP5 UPBOXPRO UPBOXPRO
    Check hardware changelog before downloading firmware
    Revision Release date Firmware changelog HW Compatibility
    1.9 STABLE 19/05/2023 New functions:
    • Spektra Calibration: new modes available
      • ON: CCT and colors are fully calibrated, working in the common color space definition set by Spektra. This means that output of multiple fixtures will match with no visible differences. Color Saturation is slightly reduced.
      • PURE COLORS: CCT is calibrated, giving perfect white matching across multiple fixtures, but primary and secondary colors are calibrated to their native color space which allows maximum color saturation. The closer you move towards white, the more closely multiple fixtures will match each other's output. The further you move away from white and the closer you move towards saturated color, the less closely multiple fixtures will match each other's output.
      • OFF: CCT doesn't guarantee High CRI Values and color output of one fixture may or may not closely match that of other fixtures.
    • Added Dimmer Speed Off
    • Added DMX Fault settings
    Improvements:
    • Renamed Dimmer Mode naming to be Dimmer Speed
    • Jump prediction was implemented on all modes if the fixture is connected in ArtNet/sACN.
    • Adjusted RDM parameters to fit new functions and new naming.
    • Adjusted Control Channel to fit new functions as follows.
      • Dimmer Speed Off (Control channel values 62 -63 )
      • DMX Fault Hold (Control channel values 64 -65 )
      • DMX Fault Blackout (Control channel values 66 - 67)
      • DMX Fault Standalone (Control channel values 68 - 69)
      • Spektra Calibration On (Control channel values 70 -71 )
      • Spektra Calibration Pure Colors  (Control channel values 72 - 73)
      • Spektra Calibration Off (Control channel values 74 - 75)
    Fixed bugs:
    • The function "Reset All Channels Controlled" (dmx values 254-255) does not work in any mode.

    Note: Hardware revision > 3.0: NET PCB is updated using ".PRL" file format, ignore ".EHEX" file in this case    		 Rev. 1.0
    Rev. 1.1
    Rev. 2.0
    Rev. 3.0
    1.5 STABLE 31/05/2021 Improvements:
    • Improved display management.
    		 Rev. 1.0
    Rev. 1.1
    Rev. 2.0

    Info Request