EclPanel TWCXL
ORDER CODE: ECLPANELTWCXL
Share me

Immagine Principale
  • ECLPANELTWCXL
  • ECLPANELTWCXL
  • ECLPANELTWCXL
  • ECLPANELTWCXL
  • ECLPANELTWCXL
  • ECLPANELTWCXL
  • The EclPanel TWCXL is an ultra-bright LED soft light engineered for large scale Film & TV productions that provides an outstanding soft source of powerful lighting. The PROLIGHTS EclPanel TWCXL comes with a full range of white tones, from daylight to tungsten, attaining a superior light quality with high CRI, TLCI, and TM-30 values. The EclPanel TWCXL allows for quick and accurate local control through 4 rotatory knobs with three fully-featured modes: CCT with +/- green shift, HSI for total control of hue, saturation and intensity and FX mode to access the pixel cinema effects. Each of the 48 sections has individual control to play the customisable cinema effects or by pixel mapping from an external controller. The unit has an onboard driver, a built-in power supply, a Wireless transceiver for remote DMX and RDM control, and network connectivity (Art-Net, sACN). 

    Features:
    1.500W RGB + Warm White LED source
    CRI >93; R9 >95; TLCI >93
    48 section pixel control and built-in lighting effects for cinema applications, colour gels matching
    Silent operation with multiple fan modes
    Wireless DMX and RDM for wireless control and communication, Ethernet connectivity

    LIGHT SOURCE
    • Source:
      1.500
      W
      RGB + Warm White LED
    • Luminous flux:
      130'725
      @3.200 K with LD filter
    • Lux:
      2'442
      lx
      @5 m full
    • CRI:
      93,4 @3.200 K; 95.4 @5.600 K
    • R9:
      95.6 @3.200 K; 95,9 @5.600 K
    • TLCI:
      93 @5.600 K
    • TM30 Rf:
      91,9 @3.200 K; 90,3 @5.600 K
    • TM30 Rg:
      103,5 @3.200 K; 102,5 @5.600 K
    • Source life expectancy:
      > 50.000 h
    OPTICS
    • Beam angle:
      109
      °
    • Field angle:
      158
      °
    • Lens type:
      medium density
      diffusion panel (interchangeable)
    • Additional optics:
      see available accessories
    COLOUR SYSTEM
    • Colour control:
      XY, CCT, RGBW, Gel, HSI, Source Emulation, colour macros, CTO on colours
    • Colour mixing:
      RGB + Warm White
    • CCT:
      CCT control range from 1.800K to 20.000K, + / - green correction, tungsten emulation
    • White presets:
      1.800 K - 20.000
      K
    • Colour wheel:
      virtual colour wheel with macros
    • Macros:
      Gels library on-board
    DYNAMIC EFFECTS
    • Control Resolution:
      16-bit dimmer, colours
    • Pixel patterns:
      pre-programmed pixel macros and cinema lighting effects patterns
    • Special features:
      linear crossfade channel from any white to any colour; virtual CTO on colours
    BODY
    • Body:
      sturdy die-cast aluminium body
    • Body colour:
      black
    CONTROL
    • Protocols:
      DMX512, RDM, ArtNet, sACN, CRMX
    • Stand Alone:
      selectable mode through 4
      RGB backlight push-encoders
    • Pixel control:
      48
      section control
    • Wireless Control:
      included, LumenRadio Timo Fx DMX/RDM compatible with both CRMX (Lumen Radio) and W-DMX (Wireless DMX)
    • RDM:
      RDM for remote monitoring and settings
    • Display:
      3.5" with new UI
    • Firmware upgrade:
      yes, via USB - DMX interface (UPBOXPRO/UPBOX1) not included
    ELECTRONICS
    • Dimmer:
      linear 0 ~ 100% electronic dimmer
    • Dimmer curves:
      4
      selectable dimming modes available
    • Strobe / shutter:
      1 - 30
      Hz, electronic
    • Display battery:
      self-charging battery backup
    • Operating temperature:
      -10° ~ +45°
    • LED Control:
      flicker free frequency with adjustable PWM
    • Selectable PWM:
      600 ~ 40.000 Hz
    ELECTRICAL
    • Mains power supply:
      100-240V - 50/60Hz
    • Max power consumption:
      1.600
      W
    • Output (at 230V):
      1
      units on a single power line
    • Power factor:
      >0,98
    • Inrush current:
      110VAC/45A, 230VAC/64.4A
    PHYSICAL
    • IP rating:
      20
    • Cooling:
      active, silent operation
    • Suspension and fixing:
      bracket for hanging and positioning
    • Signal connection:
      Amphenol XLR 5p IN/OUT connectors
    • Power connection:
      32A
      Neutrik powerCON TRUE1 IN/OUT connectors
    • Dimensions (WxHxD):
      1638x862x144
      mm
    • Weight:
      48,7
      kg
    CERTIFICATIONS / APPROVALS
    • Certifications / Approvals:
      CE, UKCA, RCM, cTUVus, FCC
    BOX CONTENT
    • 1 x ECLPANELTWCXL
    • 1 x 1,5 meters power cable (BARE END - 32A NEUTRIK POWERCON TRUE1 IP65)
    • User Manual
    • 1 x ECLPANELTWCXL spigot
    ITEMS REF.
    Accessory Code
    Description
    include
    Spigot for ECLPANELTWCXL
    optional
    Flight case for 1 pc of ECLPANELTWCXL
    optional
    Front intensified diffusion filter for ECLPANELTWCXL
    optional
    Front high diffusion filter (less output) for ECLPANELTWCXL
    include
    Front medium diffusion filter for ECLPANELTWCXL
    optional
    Front low diffusion filter (more output) for ECLPANELTWCXL
    optional
    30 degree egg crate for ECLPANELTWCXL
    optional
    60 degree egg crate for ECLPANELTWCXL
    optional
    48 chambers egg crate for ECLPANELTWCXL
    optional
    Short bracket for ECLPANELTWCXL
    optional
    Rain Cover for ECLPANELTWCXL
    optional
    Power-con 32A cable mount straight connector, IN 32A (1P+N+E)
    optional
    40° SnapGrid, for ECLPANELTWCXL by DoP choice
    optional
    Fat-Rabbit for ECLPANELTWCXL by DoP choice
    optional
    SNAPBAG 8ft DoubleHEX for ECLPANELTWC fat-rabbit (EPTWCXLSRXL)
    optional
    SNAPBAG 6' x 5' for ECLPANELTWC rabbit-ears (EPTWCXLSRXL)
    optional
    40° SnapGrid, to be mounted on SnapBag 6' x 5' (EPSRXLSBRER65)
    optional
    Single Universe DMX transceiver with Bluetooth
    optional
    Dmx cable HC5340. CANC5MXX XLR 5p->CANC5FXX XLR (f) 5p, L.3m
    optional
    Aluminum clamp for 28mm spigot, 200kg load, 48-51mm tubes, black
    optional
    Selflock slim clamp for 28mm spigot, 100 kg load, 40-70 mm tubes, black
    optional
    Steel security cable for hanging bodies, inox steel shackle, L=60 cm, black
    optional
    Firmware uploader kit, USB IN, 5pin XLR DMX OUT, USB OUT
    optional
    Firmware uploader kit, USB IN, 5-pin XLR DMX OUT connector

    Data sheet & specs

    DMX chart & personalities

    ECLPANELTWCXL Firmware rev. 1.1.00.0
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link

    Tech docs

    File name File size Download

    Software

    File name File size Download

    Firmware

    Firmware update instructions

    1 Download the firmware (only the latest version is available - contact support@prolights.it for more info)

    2 Download the updater software UpBox_Tool 

    3 Follow the instructions in the following guide
    -------------------------------------------------------------------------------
    Notes: 
    • Firmware updates require the UPBOXPRO compatible with all Prolights products
    • It's possible to use UPBOX1 and UPBOX2 *DISCONTINUED* checking the compatibility in the below tab
    • UpBox_Tool  software is compatible with all UPBOX interfaces
    • To update NET boards with .EHEX files a network cable and Professional Uploader software it's needed. It's possible to follow this guide
    Update Tool: UPBOX1UP5 UPBOX1UP5 UPBOXPRO UPBOXPRO
    Check hardware changelog before downloading firmware
    Revision Release date Firmware changelog HW Compatibility
    1.1.00.0 STABLE 09/02/2023 Improvements:
    • Improved pixel sync at low level on High led frequency values.

    Note: In order to perform the update correctly, fixture needs to be on FW 1.0.01.0016 or higher.
              If the fixture has FW release < 1.0.01.0016, please update to 1.0.01.0016 first.
    Rev. 1.0
    1.0.01.0016 BETA 16/09/2022 New functions:
    • Added modes Pixel variants 2PX,6PX,48PX for each M mode.
    Fixed bugs:
    • Minor bug fixes.
    Rev. 1.0
    Update Tool: UPBOX1UP5 UPBOX1UP5 UPBOXPRO UPBOXPRO
    Check hardware changelog before downloading firmware
    Revision Release date Firmware changelog HW Compatibility
    1.1.00.0 STABLE 09/02/2023 Improvements:
    • Improved pixel sync at low level on High led frequency values.

    Note: In order to perform the update correctly, fixture needs to be on FW 1.0.01.0016 or higher.
              If the fixture has FW release < 1.0.01.0016, please update to 1.0.01.0016 first.
    Rev. 1.0
    1.0.01.0016 BETA 16/09/2022 New functions:
    • Added modes Pixel variants 2PX,6PX,48PX for each M mode.
    Fixed bugs:
    • Minor bug fixes.
    Rev. 1.0

    Info Request